5db0a76cce94de03f86295ba2bd6ba526661d16d
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Paul Nothaft
|
696c69a6d0 |
fix(setup): put the setup token where a NAS user can find it (#1218) (#1219)
* fix(setup): put the setup token where a NAS user can find it (#1218) The token file was never missing — it was in a subdirectory nobody opens. The all-in-one image points DATA_DIR at /data/db, so the file lands beside the database inside the single volume; someone browsing that volume from a NAS container UI sees db/, storage/, logs/, backup/ and gives up. There is no shell on those boxes to run the documented `docker exec … cat` with, and the token value is deliberately kept out of the logs, so the install looked like it had swallowed its own bootstrap credential. When DATA_ROOT names a different directory, the token is now written there too — /data/SETUP_TOKEN, the first thing visible on opening the volume. The compose stack sets no DATA_ROOT and keeps exactly one file, so nothing changes there. Each copy is written independently: the canonical one failing while the volume-root copy succeeds still leaves a readable token, and only a run where every write failed falls back to logging the value. The startup banner names every copy rather than just the first, which is what sent people into db/. Both copies are 0600 and both are removed the moment setup completes. That is what makes a second copy of a single-use bootstrap secret acceptable rather than careless — and writing the test for it turned up that the burn path had TWO independent unlinks, one in clearSetupToken and one at the end of createInitialAdmin. Only the first had been updated, so the volume-root copy survived the burn: a live-looking token that no longer works, which is worse than no token at all. Docs for the same issue are already out (PicPeak/docs#15); .env.example now names the AIO paths too. * fix(setup): enforce 0600 on a token file that already exists (#1218) External review. fs.writeFileSync's `mode` applies only when the file is created — writing over an existing inode truncates it and leaves its permissions untouched. A SETUP_TOKEN someone had copied to the volume root by hand at 0644 would keep that mode, so the first-admin bootstrap credential sat group- and world-readable on a shared NAS mount while this code claimed 0600. Unlink then create, rather than chmod after write: recreating gives a fresh inode with the right mode and no window where the credential is on disk under the wrong one. The chmod stays as a fallback for an unlink that failed for a reason other than the file being absent. Test fails against the un-fixed code. * fix(setup): drop a token copy that cannot be made private (#1218) Round 2 of external review. Asking for 0600 is not the same as getting it: a CIFS/SMB mount — which is what a NAS commonly offers — carries no Unix modes, so chmod is a silent no-op and the file keeps whatever file_mode= the mount forces, typically 0644. This feature targets exactly those hosts, so it now verifies the resulting mode instead of assuming the request took. A copy that cannot be made private is removed rather than left lying there, and it does not count as written — so an install where neither copy can be protected falls through to the existing log fallback, which reaches the operator alone. Previously a chmod that threw after a successful write left the credential on disk, and a success on the other path cleared the error, so nothing reported the exposed copy at all. Test simulates the mode-less mount with chmod as a no-op and stat reporting 0644; it fails against the un-fixed code. * fix(setup): never write the token through a foreign inode, or into the logs (#1218) Round 3 of external review, two findings, both about the credential ending up readable by someone else on exactly the shared mounts this feature targets. **The log fallback defeated the point.** When no copy can be made private, the old branch logged the token at warn — and logger.js writes warnings to combined.log under LOG_DIR, which in the all-in-one image sits on the same mount as the token file. The credential moved from a file we had just refused to leave, into another file just as readable, that outlives setup. The warning no longer carries the token; server.js already prints it on stdout when no file was written, which reaches `docker logs` without touching the shared volume. **A file that could not be deleted was written through anyway.** The pre-write unlink swallowed every error, so a 0666 SETUP_TOKEN owned by another user in a sticky or ACL-controlled directory — still writable — received the live token into its existing inode. Only ENOENT is ignored now. And when the mode check finds an exposed copy it cannot remove, that is recorded separately and reported at error level: a success on the other path clears writeError, and an exposed credential must not be silenced by an unrelated success. Two tests, both failing against the un-fixed code. * fix(setup): fail closed on an exposed token, and refuse a raced symlink (#1218) Round 4 of external review. **An exposed copy left the token valid.** A directory that permits creation and denies deletion — ACL-backed or CIFS — could keep a group/world-readable file holding a live setup token, and /setup/admin went on accepting it: anyone able to read the mount could take the first super-admin account. Reporting that was not enough. The token is now revoked when a readable copy cannot be removed, which turns what is left on disk into a dead string. Private copies are removed with it, since they hold the same value. The next boot mints a fresh one and skips the undeletable file rather than rewriting it, so this converges instead of looping on the same exposure. **The write followed a raced symlink.** On a group-writable mount another local user could drop a symlink at the path between the unlink and the write, and the default 'w' flag would follow it — putting the live token in a file they own. Now created with 'wx' (O_CREAT|O_EXCL), which neither overwrites nor follows a link; having just unlinked, anything present again is that race. The mode check uses lstat for the same reason: it must describe the file, not a link target. **A verification that threw left the file behind.** writeFileSync succeeding and lstat then failing — plausible on the network filesystems this targets — left an unverified live copy on disk, and a success on the other path cleared the error so nothing said so. Cleanup is now keyed on 'did this iteration create a file', so every post-creation failure removes it. Three tests, one new; the new one fails against the un-fixed code. Full backend suite at the known baseline. * fix(setup): report the written token path again, so the banner stays quiet (#1218) A regression I introduced one commit ago. Rewriting the write loop dropped the three lines after it that publish the result, so writtenTokenFile stayed null even on a completely successful write. server.js prints the token itself only when no file was written. With this reporting nothing, the banner took that failure branch on every fresh install and put the live super-admin setup token into stdout and `docker logs` — beside a perfectly good 0600 file. That is the exact leak this path was built to close, reopened by a refactor that touched none of the logic around it. Found by external review, not by the suite: nothing asserted the accessor, only the files on disk. Now guarded — the new test fails against the regression. * fix(setup): survive a worker race, and revoke a copy that predates this run (#1218) Round 6 of external review. **A pre-existing exposed copy was invisible to the revocation.** A restart reuses the token from the database, so an old file holding that value is a live credential. If it had become group-readable and could not be deleted, nothing tracked it — created was false, so the fail-closed path never fired and /setup/admin kept accepting what was in that file. An undeletable file at the token path is now treated as live and triggers the same revocation. **A losing worker printed the token.** The shipped PM2 cluster config runs several workers against one DATA_DIR. Both pass the unlink, one wins the exclusive create, and the loser's wx write threw EEXIST — so it recorded nothing and its banner printed the live token into its own log while a perfectly good 0600 file already existed. EEXIST now checks the file: private, regular, and holding the same token counts as this loop's work already done. **A write that created the file and then threw left it behind.** ENOSPC, a short write, a delayed close on a network mount — writeFileSync can populate the inode before failing, and cleanup keyed on the call returning skipped it. Keyed on the write being attempted now, with an existence check. Two tests, both failing against the un-fixed code. Full backend suite at the known baseline (2342 passing). * refactor(setup): drop the volume-root token copy, keep the hardening (#1218) The second copy was for discoverability: DATA_DIR points into /data/db on the all-in-one image, and a NAS user browsing the volume does not open a folder called db. Six review rounds later it had earned a second inode to race, to verify, to clean up and to revoke — a symlink guard, an exclusive create, an lstat check, cluster-race handling and fail-closed revocation, nearly all of it load-bearing only because there were two files instead of one. That is a lot of attack surface for a convenience the documentation covers better. PicPeak/docs#15 now points NAS users at ADMIN_PASSWORD, which creates the admin on first boot and needs no file at all, and names the db/ subdirectory for anyone who does want the token. Neither needs a second copy. So: one file in DATA_DIR again, as before. Everything the review turned up stays, because none of it was about the second copy — the token is created with O_CREAT|O_EXCL so a raced symlink cannot capture it, its mode is verified with lstat rather than assumed, a copy that cannot be made private is removed, one that cannot be removed revokes the token instead of being logged about, a partial write is cleaned up, a concurrent worker's good file is accepted rather than triggering the log fallback, and the token never reaches the log files. setupTokenFilePaths and writtenSetupTokenFiles are gone with their tests; the hardening tests remain and still fail against unfixed code. * fix(setup): publish the token atomically instead of racing over one inode (#1218) Round 7 of external review found a race in the exclusive-create approach: two PM2 workers reaching the write together, the loser sees the winner's file after the inode exists but before its content lands, judges it wrong, and deletes it — after which the winner's own verification fails too, both report nothing written, and both print the live token into their logs. Rather than teach the loser to wait, the shared inode is gone. The token is written to a per-process temporary file, verified there, and published with rename(2). That is atomic: the file never appears at the published path with the wrong mode or half its content, a symlink sitting at that path is replaced rather than followed, and concurrent workers simply publish the same value one after another. The unlink-then-create dance, the EEXIST handling and the cross-worker deletion all disappear with it. Verifying the mode BEFORE the rename is the stronger order too: a credential that cannot be made private on a mode-less mount now never reaches the published path at all, instead of being written and then cleaned up. If publishing fails and something is still sitting at the token path, it is treated as a live credential we could not replace, and the token is revoked — unchanged in intent from the previous round, simpler in mechanism. * fix(setup): drop a dead assignment and an unused import (#1218) Both flagged by the code-quality review on #1219. `createdTmp = false` after rename(2) is never read — rename consumes the temp file, so the catch has nothing left to clean up either way. `os` was never used in the test. --------- Co-authored-by: Paul Nothaft <paul@MacStudio-von-Paul.local> |
||
|
Paul Nothaft
|
d9ad982373 |
fix(tests): raise migration-boot hook timeout pins to the 120s default (#900)
The 3.97.0-beta.0 release PR (#899) failed its backend Tests job on slideshowPublic.test.js: bootCrmDb's full migration chain crossed the suite's explicit 30s beforeAll timeout argument on a slow runner. #860 raised the config default and the jest.setTimeout pins to 120s, but hook-ARGUMENT pins override the config default and were left behind — same time-bomb, different syntax. Every beforeAll that boots the migration chain and pinned 30s/60s is raised to 120000 (16 suites). Untouched on purpose: the three suites whose pinned hooks don't run migrations (webhookDelivery, imageProcessor.storage, storageBackend) and publicQuotes' 30s pin on the rate-limit lockout test — neither grows with the migration chain. No test logic changed. Co-authored-by: Paul Nothaft <paul@MacStudio-von-Paul.local> |
||
|
Luca
|
b0912c7427 |
feat(setup): validate setup token at step 1 before advancing
Previously "Continue" on the token step only checked the field was non-empty; a wrong token wasn't caught until the final submit, after the user had filled in email + password. Add a non-burning verify: - backend: POST /setup/verify-token constant-time compares the token without consuming it (createInitialAdmin still claims it atomically on submit), gated on no-admin-exists and rate-limited like /setup/admin. - frontend: step-1 "Continue" calls verifyToken and only advances on a valid token; a wrong token shows the invalidToken error on the field, 429 -> too-many-attempts, 409 -> redirect to login. Adds integration tests for accept-without-burn / reject / closed-once-set. |
||
|
Luca
|
286975dc52 |
fix(setup): address PR #714 review — password UX, script token, race, nits
Blockers: - SetupPage now mirrors the server password rule (>=8 with upper/lower/digit) so a green client isn't bounced by the server; server errors carry a `field` (routes/setup.js) that the client maps to a translated key instead of rendering raw English. New i18n: setup.invalidToken, setup.passwordRequirements. - picpeak-setup.sh: the ADMIN_CREDENTIALS.txt block no longer dead-ends on the wizard path — when no legacy admin was seeded it prints the one-time setup token (from data/SETUP_TOKEN / docker compose logs) and points at /setup. Concern: - createInitialAdmin creates the admin + burns the token in ONE transaction, atomically claiming the token (null-if-present, expect 1 row) so a double-submit can't create two super_admins. Cross-DB (whereNotNull, trx-only writes). Added a concurrency test. Nits: - SetupPage redirects to /login when /setup/status errors (no form flash on a configured instance). - Dropped the unused DATABASE_URL from docker-compose.yml. - Documented why secrets are chmod 644 (three different reader users). |
||
|
Luca
|
415bffa04c |
feat: zero-config first run — in-browser admin bootstrap + auto-generated secrets
Fresh installs need nothing in .env. See PR description for the full feature. |